Skip to content

Office Address

1301, Building B, Smart Valley, Country Garden, No. 50, Tiezai Road, Xixiang Street, Bao'an District, Shenzhen, CN

Phone Number

+8613686469587

Email Address

[email protected]

India market access · BIS CRS & WPC ETA

Importing TV Boxes into India: BIS Registration, WPC Approval & Documentation

Electronics reach India through two parallel gates. The Bureau of Indian Standards registers the product under its Compulsory Registration Scheme against Indian safety and EMC standards — wired or wireless — and the WPC wing of the Department of Telecommunications grants Equipment Type Approval for radio. Importers additionally carry extended-producer-responsibility registration for e-waste. This guide sets out what applies, what DataMax already documents, and exactly what your importer or authorised Indian representative must file.

  • BIS CRS
  • R-number marking
  • WPC ETA
  • IS 13252-1
  • EPR / E-waste
DATAMAX MARKET PLATE BIS SELF-DECLARATION R-4100000000 MODEL / INPUT DM-XXXX · 5V DC 2.0A IS 13252-1 · WPC ETA · AIR (INDIA)
Illustrative plate — the BIS R-number is granted after testing at a BIS-recognised Indian laboratory and is never pre-marked by the factory.

India conformity decision point

The First Fork: BIS Always, WPC When There Is Radio

Unlike markets where a wired device escapes the radio regime, in India BIS Compulsory Registration applies to the electronics category regardless of radio. Adding Wi-Fi, Bluetooth or cellular then opens the separate WPC equipment-approval gate. The two filings run against the same named SKU.

Android TV device shipped to the Indian market 01 — WIRED, NO RADIO 02 — WI-FI / BLUETOOTH / CELLULAR Wired Ethernet / HDMI only BIS Compulsory Registration still applies, tested to Indian safety and EMC standards Radio transmitter on board BIS registration plus WPC Equipment Type Approval for the radio configuration Route: BIS CRS only Test at a BIS-recognised Indian laboratory, register for an R-number Route: BIS CRS + WPC ETA Radio reports filed with WPC; cellular adds import-licensing work RESULT ON THE PRODUCT BIS R-number marked with the Indian standard reference on every unit RESULT ON THE PRODUCT BIS marking plus the WPC approval referenced for customs clearance

Wired player: the BIS CRS path

Electronics and IT goods are registered under the BIS Compulsory Registration Scheme after testing at a BIS-recognised laboratory in India against the applicable Indian standards — safety under IS 13252 Part 1 and the relevant EMC standards. The manufacturer (or its authorised Indian representative for a foreign factory) obtains the registration and marks the unique R-number; there is no factory inspection, but a registration without a genuine Indian test report is invalid.

Wireless model: add WPC ETA

Wi-Fi, Bluetooth or cellular equipment additionally requires WPC Equipment Type Approval based on radio-frequency test evidence for the licence-exempt or licensed bands used. The approval sits with the importer or manufacturer filing; a cellular device also needs the applicable import licensing and identifier work. BIS and WPC are separate procedures and neither substitutes for the other.

The rule set, scheme by scheme

Four Pillars of an Indian Compliance File

These anchors define an Indian dossier for an Android TV box, projector or signage player. Foreign manufacturers act through an Indian entity, approvals follow the named model, and customs will check both marks at import.

BIS (Conformity Assessment) Regulations · CRS BIS Act 2016

Compulsory Registration against Indian standards

Notified electronic and IT goods cannot be sold or imported without BIS registration. Samples are tested at a BIS-recognised Indian laboratory against IS 13252 Part 1 for safety and the applicable IS/IEC EMC standards; the resulting R-number is marked on the product and registration is renewed on its defined cycle.

Equipment Type Approval WPC · DoT

Wireless approval from the telecom regulator

The Wireless Planning & Coordination wing approves radio equipment against India’s frequency and power rules. Wi-Fi and Bluetooth models need ETA from RF evidence; the applicable simplified or module-based procedure is followed where WPC allows it, and cellular equipment carries additional licensing. Importers present the approval during customs clearance.

EPR + substance limits E-Waste Rules 2022

Producer registration and RoHS-style limits

The E-Waste (Management) Rules place extended-producer-responsibility registration on the manufacturer or importer through the CPCB portal, with recycling targets and RoHS-style restricted-substance limits. The crossed-out-bin style marking and producer information accompany the product; the obligation belongs to the entity placing goods on the Indian market.

Labelling & model identity R-number

Marking follows one tested configuration

The BIS standard reference and unique registration number, model and electrical rating are permanently marked. Registration follows the tested model and key components; changing the radio module, power supply or enclosure can require a fresh registration, and a foreign manufacturer acts through an authorised Indian representative.

DATAMAX — CONFORMITY PLATE BIS / STANDARD R-4100000000 · IS 13252-1 INPUT 5V DC 2.0A MODEL / REV DM-XXXX · R1 RESPONSIBLE PARTY AUTHORISED INDIAN REPRESENTATIVE · WPC ETA ON FILE 1 2 3 4

Device label anatomy

Reading a BIS / WPC-Compliant Nameplate

The R-number and Indian standard reference are what an inspector or customs broker reads first. WPC approval is referenced in the import documents rather than as a consumer logo, and the importer or AIR identity ties the file together.

  1. 1

    BIS R-number and standard

    The unique registration number with the applicable Indian standard reference, permanently marked after grant; it cannot be printed in anticipation of registration.

  2. 2

    Model and hardware revision

    The label identifies exactly the tested configuration. A different radio module, enclosure or power supply may constitute a new model needing its own registration.

  3. 3

    Electrical rating and adapter

    Input rating and the adapter reference appear together; the adapter itself is within the same BIS scope expectation and is covered by evidence.

  4. 4

    Importer / AIR and WPC file

    A foreign manufacturer acts through an authorised Indian representative; the WPC ETA and EPR registration are held for customs and market-surveillance inspection.

Standards & testing landscape

Registration Is Based on an Indian Laboratory Test

BIS registration is not a factory-audit certificate: samples of the exact model are tested in India at a BIS-recognised laboratory against IS 13252 Part 1 (aligned with the international audio/video and IT safety requirements) and the Indian EMC standards. The R-number is granted on those reports and carries defined renewal cycles and surveillance risk if production drifts from the tested design.

DataMax builds to the international equivalents, supplies the construction file and rated adapters and provides engineering samples and responses for the Indian test run. CE, FCC or other foreign documents are useful engineering evidence but do not replace the BIS test or the WPC filing — we present them as preparation, never as an Indian approval.

See how compliance evidence is controlled on the line

Held by DataMax today

International Evidence That Supports the Indian File

DataMax does not claim a BIS registration or WPC approval it has not been issued. The documents below demonstrate the design already meets demanding international radio, safety and quality schemes; they shorten the engineering preparation for the Indian laboratory and WPC filing but are not Indian authorisations. The full set lives on the certifications page.

ISO 9001 quality system — DataMax certificate scan
ISO 9001 quality system Management-system evidence supporting controlled, repeatable production.
CE / RoHS documentation — DataMax certificate scan
CE / RoHS documentation Safety- and substance-related engineering input for the equivalent Indian standards.
FCC ID radio evidence — DataMax certificate scan
FCC ID radio evidence Radio behaviour documentation that supports the WPC technical preparation.
PCBA quality inspection on the DataMax production line
Incoming and in-process PCBA inspection

A registration is only as good as the next batch

An approval describes a tested sample; production has to match it. DataMax runs incoming-material control, in-process inspection, aged 100% functional testing and outgoing audit under the ISO 9001 management system, with laboratory measurement feeding the same quality file. Change-controlled BOMs keep later batches inside the tested configuration, so the unit a customs broker inspects matches the unit that was registered.

Brightness measurement under test in the DataMax laboratory
Optical brightness measurement in the lab

Responsible parties

Who Holds the File: Indian Entity and Manufacturer

BIS registration for a foreign factory is used alongside an authorised Indian representative, and EPR sits with the producer or importer. Below is the split programmes agree before the first purchase order.

Your side of the file

  • Acts as the importer of record and, where required, the authorised Indian representative
  • Submits or sponsors the BIS registration and WPC ETA and pays laboratory and authority fees
  • Holds the EPR / e-waste producer registration and recycling obligations
  • Approves R-number label artwork, English manuals, rating and plug configuration
  • Presents BIS and WPC documentation at customs and answers market-surveillance enquiries

What we supply into the registrations

  • Construction file: BOM, schematics, block diagrams and key-component declarations
  • Engineering samples built to the configuration submitted for the Indian laboratory
  • Radio and antenna parameters for the WPC filing and pre-compliance checks
  • Adapter and safety evidence plus R-number label artwork drafted to the filing
  • Change control that flags module, BOM or power-supply changes needing re-registration

Shipping to another market? Start from the global compliance hub and read the other country guides — United States, European Union & UK, Brazil and India; every market runs its own split of importer and manufacturer duties.

India compliance FAQ

Direct Answers, No Blanket Approvals

Does a wired TV box need BIS registration even without radio?

Yes. BIS Compulsory Registration attaches to the notified electronics category, not to the radio. A wired player is tested at a BIS-recognised Indian laboratory against IS 13252 Part 1 and the applicable EMC standards, registered, and marked with its R-number. A wireless model then adds the separate WPC approval on top; the two procedures do not replace each other.

Who holds the registration — DataMax or our Indian company?

BIS registration is granted to the manufacturer; a manufacturer outside India uses an authorised Indian representative identified in the filing, while the importer of record handles customs and market obligations and carries EPR registration. In practice importers sponsor and coordinate the whole file. DataMax supplies the tested sample, construction file and engineering responses; it cannot obtain or hold the approvals in your name.

Can our existing FCC or CE reports replace the BIS or WPC test?

No. BIS requires testing at a recognised Indian laboratory against Indian standards, and WPC reviews the radio evidence under India’s own frequency rules. Foreign reports are strong preparation — they show the design’s margins and radio behaviour and can reduce rework — but the R-number and ETA are distinct Indian acts. We use existing evidence to make the first Indian submission clean rather than presenting it as an approval.

What is EPR, and is it really required for a TV box?

Extended Producer Responsibility under the E-Waste (Management) Rules requires the producer or importer to register on the CPCB portal, meet recycling targets and carry the associated marking and information. It belongs to the entity placing the electronics on the Indian market and is separate from BIS and WPC. Importers typically hold one EPR registration covering the catalogue rather than one per SKU.

If we change the radio module later, does the registration survive?

Not automatically. BIS follows the tested model and its key components, and WPC approval follows the radio configuration; a module, antenna, power-supply or enclosure change can require a fresh or amended filing. DataMax runs change-controlled BOM management so you are warned before a changed unit ships, and we schedule the additional test rather than substituting silently.

How long do BIS and WPC take, and who pays?

Timing depends on the laboratory queue, sample logistics and whether the first submission passes, so we do not quote fixed calendar numbers publicly. The Indian entity normally pays the laboratory, registration and WPC fees; DataMax supplies samples, the construction file, radio data, label artwork and engineering responses. Send the exact model and radio set and we will state which filings the named SKU requires.

Request the India Document Pack Before the First Shipment

Send the exact model and its radio configuration. Engineering returns the construction-file inputs, radio parameters, sample plan and the model-specific list of what your importer or authorised Indian representative must file with BIS and WPC — before you commit to a container.

Stay Updated with the Latest TV Box Trends

Subscribe to our newsletter and be the first to know about new products, OEM/ODM tips, exclusive offers, and factory updates.

Your experience on this site will be improved by allowing cookies.
Chat with us on WhatsApp