Skip to content

Office Address

1301, Building B, Smart Valley, Country Garden, No. 50, Tiezai Road, Xixiang Street, Bao'an District, Shenzhen, CN

Phone Number

+8613686469587

Email Address

[email protected]

B2B product support center

Product Support, RMA & Firmware Help

For traders, brands and project buyers using DataMax TV boxes, signage players and projectors: one tracked desk for firmware, diagnosis, spares and RMA.

  • Every case gets a ticket ID
  • Traced to your PO and batch
  • Answered during working days

How we support

Support Built Around Purchase Orders

Trade customers first: cases are logged, traced to a batch, and handled during working days by ticket.

Firmware & OTA guidance

Right file, steps and OTA setup for your model and build, plus wrong-flash recovery.

Structured fault diagnosis

Firmware, settings and hardware checks via your video, logs and screenshots, before return.

Spare parts & RMA

Spare parts and assessed returns for confirmed failures, per the warranty terms in your PI.

Volume-project support desk

Repeat orders and fleets get a dedicated window that knows your SKU, branch and history.

Batch projects move through a dedicated window

Repeat buyers and fleet operators never restart from zero: your window holds SKU lists, branches, shipment history and quality records.

Set up a support window
DataMax support manager and a B2B customer confirming a support arrangement
One desk, one owner per project
Support by product line Android TV boxes Projectors Digital signage

Before you write

Six Things to Ready Before Opening a Ticket

All six ready, most tickets clear Triage in one pass.

  • Model name / SKU
    read from the body label
  • Firmware version
    plus a Settings → About screenshot
  • PO number or invoice
    to trace the production batch
  • Fault video or photos
    a short clip of the symptom
  • Reproduction steps
    steps, result and when it started
  • Quantity & pattern
    one unit, some, or the whole batch
Support and engineering review meeting tracing a ticket to its production batch
Evidence up front starts diagnosis with the first reply.

The ticket board

Five Statuses From Submit to Closed

Each status shows who is acting and what comes next on our engineers’ board.

Submit 01
Triage 02
02 / status

Classified and owned

Model, PO and warranty confirmed; an engineering owner is assigned.

Batch traced
Diagnosis 03
03 / status

Firmware / settings / hardware

Firmware, settings and hardware checked remotely; logs and files are exchanged.

Remote Engineering
RMA or remote fix 04
04 / status

Resolved or returned

Most cases close remotely; confirmed failures get an RMA with terms per contract / PI.

RMA Spares
Closed 05
05 / status

Recorded against the batch

You confirm the fix; the ticket closes and root cause is logged against the batch.

Archived

No ticket number means no tracking. Resend chat requests via the inquiry form or contact page so they enter the board.

Common requests

Three Fast Lanes to the Right Desk

Pick a lane and reach the right terms before opening a ticket.

Lane 01

Firmware & OTA

Update steps, recovery files, branch confirmation.

  • Safe updates
  • Wrong-flash recovery
  • Custom-build OTA
Open the firmware FAQ
Lane 02

Hardware & RMA

Faulty units, claims and assessed returns.

  • Coverage terms
  • RMA shipping
  • Out-of-warranty
Read warranty terms
Lane 03

Shipping & accessories

Remotes, adapters and common spare parts.

  • Remotes & adapters
  • Spare-parts ratio
  • Accessory orders
Order parts & samples

Need documents? Download the catalog for specs and model sheets.

Firmware & OTA

Match the File to Model and Project

Most “dead after update” cases are wrong-branch files, not hardware.

01

Custom builds stay on project branch

Project SKUs ship a dedicated build and update from that branch. A generic or another customer’s file can remove features, branding and certification.

02

Never cross-flash by chipset alone

A shared SoC does not mean shared firmware: Wi-Fi module, timing, remote map or DRM keys may differ. Match the full label model name.

03

GMS units update inside certification

Updates stay within certification; unapproved builds can affect certified services, and we coordinate the compliant path.

Already flashed the wrong firmware?

Don’t keep retrying the file. Open a ticket with the label photo and current screen and engineering guides recovery; steps also in the support FAQ.

Five-minute self-triage

Run These Six Checks Before the Ticket Reaches Engineering

A large share of support tickets turn out to be environmental or configuration issues rather than faulty hardware — the wrong input selected, a tired HDMI cable, a remote that lost pairing. Working through the six checks on the right takes minutes and, when the symptom survives them, gives the ticket exactly the evidence engineering needs to start diagnosing immediately.

Two rules make every case faster: match firmware to the full label model name, never to the chipset, and keep custom-project units on their own branch — the firmware rules above explain why crossing either line creates the “died after update” tickets we see most.

When the symptom is environmental in the field, the buying-stage documentation often prevents it: the dust-free engine guide for projector airflow and service intervals, and the warranty page for exactly how confirmed failures move through RMA.

  • Boot loop after an update

    Usually a wrong-branch file rather than hardware. Confirm the exact label model name and the firmware file used, stop retrying, and open a ticket for the correct recovery image.

  • No picture or “no signal”

    Verify the selected source/input, try a known-good HDMI cable and port, and power-cycle display and device together. HDCP handshakes often clear with this sequence.

  • Wi-Fi drops or won’t connect

    Check the 2.4/5 GHz band and AP capacity first, then confirm the wireless module fitted to the SKU — modules differ by configuration even within one model family.

  • Remote stops responding

    Voice remotes pair over Bluetooth, not line of sight: re-pair from Settings and check batteries. IR-only remotes need a clear path to the front window.

  • No audio

    Check HDMI/ARC routing and any passthrough setting against your amplifier, test the internal speaker path, and confirm the content is not an unsupported audio format.

  • Projector overheating or shutting down

    Clear vents of dust, confirm mounting clearance and airflow, and review the dust-free engine guidance — thermal shutdown is protection, not a fault by itself.

Behind every ticket

Real Repair, Aging and Inspection Capacity

The campus that built your order: a repair loop, aging and four quality gates.

Repair & rework workshop at the DataMax factory
Repair & rework workshop Returns diagnosed at component level; findings feed root-cause data back to production.
Aging workshop corridor at the DataMax factory
Aging workshop corridor Loaded units run on aging racks to catch early-life failures before sealing.
PCBA quality inspection at the DataMax factory
PCBA quality inspection Populated boards checked against the approved sample at the in-process station.
IQC

Incoming Quality Control

Parts and PCBA checked against an approved sample; suspect lots quarantined.

IPQC

In-Process Inspection

First-article and patrol inspection at each station, with AOI fixtures.

FQC

100% Functional & Aging

100% functional test and aging, plus RF verification on wireless models.

OQC

Outgoing Audit

Golden-sample audit, then drop and packaging checks before sealing.

Support FAQ

Firmware, RMA and Who Handles What

How do I update firmware?

Settings → System update shows the OTA path for your build. For manual updates use only the file for the full label model name; custom builds take their branch package from support.

What should I do if I flashed the wrong firmware?

Stop, do not re-run it. Send the label photo, file name used and a current-screen photo. Many units recover with the correct image or recovery procedure; some may need rework.

How long until you reply?

Every request gets a ticket number and is handled during working days, tracked by ticket. We quote no fixed hours — faults differ — but complete checklist items up front speed the first technical reply.

Who pays the shipping for an RMA?

It follows your contract and proforma invoice. In-warranty failures follow the agreed warranty terms; out-of-warranty or misuse damage is quoted before return, and the ticket states shipping before goods move.

Can I buy spare parts separately?

Remotes, adapters and common spares come via the parts / sample channel with model and quantity. For fleets, add a small spare-parts ratio to the batch order.

Can an end user contact the factory directly?

End users are supported by the seller — the trading company, brand or retailer holding warranty and invoicing. In-warranty claims reach us through that channel with the PO; out-of-warranty repair is quoted case by case. Buyers with an active PO contact us directly.

The screen says “no signal” even though the box is powered on — what do I check?

Work through the chain in order: confirm the display is on the HDMI input the box is plugged into, swap in a known-good short HDMI cable, try the other port if available, and power-cycle the display and box together (this re-runs the HDCP handshake). Also check whether the box has output set to a resolution the display does not support — a recovery boot with a reset of display settings is part of the guided procedure. If two known-good cables and ports still show no signal, open a ticket with the model label and a short video of the sequence.

My Bluetooth voice remote has stopped working. How do I re-pair it?

First replace the batteries and make sure no other paired remote or gamepad is nearby. Put the remote within a metre of the box, open Settings → Remotes & Accessories and choose add/pair accessory, holding the pair buttons on the remote as shown in the model guide. If the remote previously paired and disappeared after an update, remove the old entry and pair again; IR fallback still works for basic keys during troubleshooting. Persistent pairing failure on one unit after a known-good remote test goes through the ticket board as a hardware case.

A projector shuts down after running for a while. Is it faulty?

Not necessarily — thermal protection shuts the light source down when airflow is blocked, which is the most common cause in ceiling-mounted or enclosed installations. Check that vents are not pressed against a ceiling or sealed inside a tight box, that filters and intake areas are clear of dust, and that ambient room temperature is within the operating range; the dust-free optical-engine page explains which models are designed for long service intervals. If shutdowns continue with confirmed clear airflow and normal temperature, treat it as a fault and open a ticket with a video, mounting photo and the firmware version.

See also the warranty page, or start on the inquiry form.

One Ticket, One Owner, Full Batch Traceability

Attach the six checklist items and your case is resolved against the order’s production records.

Stay Updated with the Latest TV Box Trends

Subscribe to our newsletter and be the first to know about new products, OEM/ODM tips, exclusive offers, and factory updates.

Your experience on this site will be improved by allowing cookies.
Chat with us on WhatsApp